Puky H25 Manual De Instrucciones página 11

Small parts that may be required
during the assembly process (for
example, screws and washers)
must be kept away from small chil-
dren. There is a risk of suffocation
caused by swallowing. Also, keep
all packaging material away from
children.
The assembly must be carried out
carefully by an adult in order to en-
sure that accident and injury do not
subsequently result. Take plenty of
time to assemble the product.
Some of the assembly tasks re-
quire dexterity and experience in
the use of tools (e. g. wrenches). If
you are not certain, please consult
your specialist dealer or a work-
shop.
In some places, certain force is re-
quired in order to tighten the
screws. This force is given in New-
ton Metres (for example, 2 Nm). If
a screw is tightened without suf-
ficient force, the connection may
be too loose and not safe. If the
force is too great, the screws and
other parts may be damaged and
destroyed.
User Manual
Figure 1: Pull up the back rest and
push into place.
The back rest is se-
cured when it engages
perceptibly.
Figure 2: Insert screws (number 6)
from above, through the
frame.
Figure 3: Position the front axle on
the screws and use
washers and nuts to
secure in place.
Figure 4: Insert screws (number 7)
from above, through the
floor panel. Connect the
sleeve nuts and tubes.
Screw the floor panel to
the front axle.
Figure 5: Attach the towing rod to
the hand cart so that it
engages. Then attach
the handle to the rod.
Figure 6: Use the press studs of
the pocket to attach it to
the fabric cover.
11
GB