Expondo RCFI-1O Manual De Instrucciones página 4

• Halten Sie das Gerät sauber.
• Bei Nichtgebrauch sollte der Gefriertisch mit einer
Abdeckung abgedeckt werden. Dadurch werden
unbeabsichtigte mechanische Beschädigungen
sowie Verunreinigungen und Staub vermieden.
• Reinigen Sie das Gerät vor, und unmittelbar nach
jedem Gebrauch. Insbesondere sollten alle Teile, die
mit dem Eis in Berührung kommen, gereinigt werden.
• Lassen Sie nach jeder Reinigung alle Teile gut
trocknen, bevor das Gerät erneut verwendet wird.
• Bewahren Sie das Gerät an einem trockenen, kühlen,
vor Feuchtigkeit und direkter Sonneneinstrahlung
geschütztem Ort auf.
6
U S E R M A N U A L
TECHNICAL DATA
Parameter description
Product name
Model
Rated voltage [V~]/
Frequency [Hz]
Rated power [W]
Refrigerant
(Refrigerant Amount)
Dimensions of the
freezing surface [mm]
Dimensions [mm]
Weight [kg]
Product name
Model
Rated voltage [V~]/
Frequency [Hz]
Rated power [W]
Refrigerant
(Refrigerant Amount)
Dimensions of the
freezing surface [mm]
Dimensions [mm]
Weight [kg]
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
To increase the product life of the device and to ensure
a trouble-free operation, use it in accordance with this user
manual and regularly perform the maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. Taking
into account technological progress and noise reduction
opportunities, the device was designed to reduce noise
emission risks to the minimum.
LEGEND
The product satisfies the relevant safety
standards.
Read the instructions before use.
Rev. 19.02.2019 Rev. 19.02.2019
Parameter value
Fried Ice Cream Machine
RCFI-1O RCFI-1S
230/50
880
R410a (0.52kg)
The original operation manual is in German. Other
Ø500x25 500x500x25
language versions are translations from German.
2. USAGE SAFETY
700x700x850
Electrical equipment
55
Fried Ice Cream Machine
RCFI-1O-6 RCFI-2O-6
Whenever „device" or „product" are used in the warnings
230/50
and instructions, it shall mean Fried Ice Cream Machine. Do
not use in very humid environments or in the direct vicinity
of water tanks. Prevent the device from getting wet. Risk
1,120 2,100
of electric shock! Do not cover air inlets / outlets. When in
use, do not put your hands or other items inside the device!
R410a R410a
(0.52kg), (2*0.52kg),
2.1. ELECTRICAL SAFETY
R134a R134a
a)
(0.13kg) (0.13kg)
Ø500x25
b)
1,100x700 1,730x700
x850 x850
75 130
c)
using state-of-the-art technologies and
d)
USER MANUAL.
2.2. SAFETY AT THE WORKPLACE
a)
b)
c)
d)
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Electric shock warning.
Only use inside.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details it may
differ from the actual machine.
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or even death.
The plug must fit the socket. Do not modify the plug
in any way. Using the original plugs and matching
sockets reduces the risk of electric shock.
Avoid touching earthed elements such as pipes,
heaters, boilers and fridges. There is an increased risk
of electric shock if the earthed device is exposed to
rain, in direct contact with a wet surface or operating
in a humid environment. Water ingression into the
device increases the risk of damage to the device
and of electric shock.
Use the cable only in accordance with its designated
use. Never use it to carry the device or to pull the
plug out of a socket. Keep the cable away from heat
sources, oil, sharp edges or moving parts. Damaged
or tangled cables increase the risk of electric shock.
If using the device in a humid environment cannot
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock.
Make sure the workplace is orderly and well lit. A
messy or poorly lit workplace may lead to accidents.
Try to anticipate what may happen, observe what is
going on and use common sense when working with
the device.
Upon discovering damage or irregular operation,
immediately switch the device off and report it to a
supervisor without delay.
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
7