Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1. Safety instruction
•
Once after received this product , please take and put
carefully. And check cautiously that whether the prod-
uct was damaged or not during the transportation, if yes,
please not use this fixture and contact local dealers or
manufacturers as soon as possible.
•
The applicable temperature for the lighting is below
40°C. Do not use the lighting above the temperature.
ta=40ºc
•
The fixture applicable widely, it must keeping clean,
Please do not in overheat or dusty environment use the
device. Do not touching Chemical liquid.
•
Should be paid attention to the use of this product: fire,
heat, electric shock, loss caused by severe or fatal inju-
ry, in electricity or to read the instructions before instal-
lation, follow the safety instruction and pay attention
to the manual and warning signs on the equipment, if
you have any other questions about how safe operating
equipment, please contact the dealer or manufacturer
as soon as possible.
•
According to the procedures described in this operating
instructions, please do not open by yourself. Any break,
please contact professionals, and must by the profes-
sional and technical personnel for repair.
•
Do not power in and open before installation. Let have a
rest when continuous work for eight hours. It will longer
the device using lift.
•
Fixed installation, to prevent the strong vibration or im-
pact of the device.
•
The distance between the device and the projectile to
keep at least 0.5 meter.
•
Never look directly into the light source,as sensitive per-
sons may suffer an epileptic shock(especially meant for
epileptics)!
•
When light output position of the device of dustproof
glass breakage, cracks or other visible damage, user
should replace the new glass to continue to use.
2. Installation
•
When install this equipment please make
sure there's no flammable surfaces (decorated
things, etc) and minimum distance of 0.5M from
the equipment to the flammable.
•
The installation of the effect has to be built and con-
structed in a way that it can hold 10 times the weight and
without any harming deformation.
MADBOX 3 IN 1
ENGLISH VERSION
•
The installation must always be secured with a second-
ary safety attachment, e.g. an appropriate safety rope.
Never stand directly below the device when mounting,
removing or servicing the fixture.
3. Product Specification
•
Input voltage: DC12V
•
Fuse: BGDP¢5*20mm 250VAC T2A
•
Power load: 220V 20W
•
Power consumption: 220V 25W
•
Power cable mode: DC single input
•
LED: 4*3W (R1/G1/B1/W1), 32*0.2W RGB 3in1
•
Laser: 100mw/650nm+30mw/532nm
•
Control mode: sound/auto
•
Max working Temp: 40ºc
•
Housing max ambient Temp:65ºc
•
Net weight:1.6Kg; Gross weight: 2.3Kg
•
Product size:159 X 248 X 210mm
p. 5
Publicidad
Tabla de contenido
