Tool Holder, Attachments; Changing Tools [3]; Centrotec Tool Chuck [4] - Festool BHC 18 Li Manual De Instrucciones

WARNING
Risk of injury

Always disconnect the battery pack before per-
forming any type of work on the machine!

Changing tools [3]

 The SDS-plus system clamps drilling tools in
position without requiring a tool wrench.
CAUTION
Hot and sharp tools
Risk of injury

Do not use insert tools that are blunt or defec-
tive.

Wear protective gloves.
3
2
12

Tool holder, attachments

3-1
click
1
3-2
Inserting the tool

Clean the tool shaft and grease lightly.

Do not retract the release sleeve [3-2], instead
turn the tool into the tool adapter [3-1] until it
clicks into position.

Check that the tool is seated securely.
Removing the tool

Pull back the release sleeve [3-2] and remove
the tool.

CENTROTEC tool chuck [4]

Quick change of tools with CENTROTEC shaft
Only clamp CENTROTEC tools in CENTRO-
TEC tool chucks.

Before working with the CENTROTEC tool
chuck, set the selector switch [1-5] to the drill
symbol.
4
1
2
click
3
click
4
5