Working With The Machine; On/Off Switch [1-4]; Belt Clip [1-6]; Acoustic Warning Signal - Festool BHC 18 Li Manual De Instrucciones

Consider the pictures on the fold-out page.

On/Off switch [1-4]

Press = ON, release = OFF
 The speed of the machine depends on how far
the on/off switch is pressed in.

Belt clip [1-6]

The belt clip (right/left) allows the user to attach
the machine briefly to work clothing.
WARNING
Risk of injury, electric shock

Always disconnect the battery pack from the
machine before any cleaning or maintenance!

All maintenance and repair work which requires
the motor housing to be opened, must only be
carried out by an authorised service workshop.
WARNING
Any maintenance or repair work that requires
opening of the motor or gear housing should only
be carried out by an authorised Customer Service
Centre (name supplied by your dealer)!

Maintenance or repair work carried out by an
unauthorised person can lead to the wrong con-
nection of the power cord or other components,
which in turn can lead to accidents with serious
consequences.
Use only original Festool accessories and Festool
consumable material intended for this machine.
These components are designed specifically for
this machine. Using accessories and consumable
material from other suppliers will most likely affect
the quality of your results and limit warranty
claims. Machine wear or your own personal work-
load may increase depending on the application.
Protect yourself and your machine, and preserve
14

Working with the machine

Acoustic warning signals sound and the machine
switches off in the following operating states:
peep

Change the battery

Reduce the machine load

Service and maintenance

EKAT
1
Note the following information:
– Keep the ventilation slits on the machine free and
clean to ensure adequate cooling.
– Keep the contacts on the machine, charger and
battery pack clean.
instructions of the battery pack!

Accessories

your warranty claims by always using original Fes-
tool accessories and Festool consumable material!
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festoolusa.com".
Systainer
Many Festool products are shipped in a unique sys-
tem container, called "Systainer". This provides
protection and storage for the tool and accessories.

Acoustic warning signal

Battery low or machine overloaded:
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at:
www.festoolusa.com/service
4 Use only original Festool spare parts!
Order No. at:
5
3
2
www.festoolusa.com/service
For service, maintenance, disposal and
transport of the battery pack, note enclosed