Product Description; Prior To First Use - tomado TMF1501B Instrucciones De Uso

1. Lid with spout and silicone ring
2. Milk jug
3. Handle
4. Power base
5. On / off button with indicator led
6. Function button with indicator light
7. Attachment for warming and frothing
7
Before using the appliance for the first time, please proceed as follows: carefully remove the milk frother from its packaging and
remove all the packaging material. Keep the packaging (plastic bags and cardboard) out of reach of children. After unpacking
the appliance, carefully check it for external damage that may have occurred during transport. Place the milk frother on a flat,
heat-resistant surface.
Clean the milk jug, cover, attachment and spring with warm water and a mild washing-up liquid. Dry these components
thoroughly.
Only clean the base unit with a damp cloth, and dry thoroughly. The milk frother is only suitable for frothing and warming
milk. Never fill the milk frother with other liquids.
Check that the voltage corresponds with what is stated on the information plate. Insert the plug into the socket.
Place the attachment (without spring) at the bottom of the milk jug onto the drive shaft. Fill the milk jug with the required
quantity of milk. Take note of the upper maximum indication for warming milk only - MAX
capacity is 100 ml. Place the cover and place the milk jug on the power base.
Press the function button T repeatedly to select the correct function / temperature. The colour of the indicator light in the
function button corresponds to the selected function.
WARM ± 38°C - green indicator light
HOT ± 68°C - red indicator light
Press the on/off button to switch on the milk frother. The indicator led in the on/off button will light and the mixer will start
to turn.
Depending on the quantity of milk, the milk frother will stop automatically after approximately 310 to 550 seconds.
Once the milk frother is ready, the indicator led in the on/off button will turn off.
When the milk frother is ready, remove the milk jug from the power base and pour the warm milk into a mug or cup via the
spout. Remove the plug from the socket after each use.
After use, the milk frother should be cleaned as described in the chapter CLEANING & MAINTENANCE.
Allow the milk frother to cool for 2 minutes before using it again, or pour some cold water into the milk frother.
This will allow it to be used again sooner.

PRODUCT DESCRIPTION

PRIOR TO FIRST USE

WARMING MILK
EN - 11
1
2
4
5
6
- 300 ml. The minimum
3