Frothing Milk; Cleaning And Maintenance - tomado TMF1501B Instrucciones De Uso

Check that the voltage corresponds with what is stated on the information plate. Insert the plug into the socket.
Place the attachment (with spring) at the bottom of the milk jug onto the drive shaft. Fill the milk jug with the required
quantity of milk.
Take note of the lower maximum indication for frothing milk - MAX
may overflow when using too much milk. The minimum capacity is 100 ml.
Making warm frothed milk
Place the cover and place the milk jug on the power base.
Press the function button T repeatedly to select the correct function / temperature.
WARM FROTHING - purple indicator light
The colour of the indicator light in the function button corresponds to the selected function.
Press the on/off button to switch on the milk frother. The indicator led in the on/off button will light and the whisk will start
to turn. Depending on the quantity of milk, the milk frother will stop automatically after approximately 270 seconds.
Once the milk frother is ready, the indicator led in the on/off button will turn off.
Making cold frothed milk
Place the cover and place the milk jug on the power base.
Press the function button T repeatedly to select the correct function / temperature.
COLD FROTHING - blue indicator light
The colour of the indicator light in the function button corresponds to the selected function.
Press the on/off button to switch on the milk frother. The indicator led in the on/off button will light and the whisk will start
to turn. Depending on the quantity of milk, the milk frother will stop automatically after approximately 110 seconds.
Once the milk frother is ready, the indicator led in the on/off button will turn off.
When the milk frother is ready, remove the milk jug from the power base and pour the frothed milk into a mug or cup via
the spout. Remove the plug from the socket after each use.
After use, the milk frother should be cleaned as described in the chapter CLEANING & MAINTENANCE.
Allow the milk frother to cool for 2 minutes before using it again, or pour some cold water into the milk frother.
This will allow it to be used again sooner.
TIPS
• You will get the best milk froth result with full milk.
• If there is too little milk in the milk frother (less than 100 ml), the result will be poorer.
• The quality of the milk froth may differ significantly between different brands of milk. Experiment with other brands,
if necessary, for a better result.
• The attachment is provided with the spring for frothing. Do you only want to warm milk? In that case, carefully remove
the spring from the attachment.
Remove the plug from the wall socket and allow the milk frother to cool prior to cleaning.
Clean the milk frother after every use.
Remove the milk jug from the base and remove the attachment from the milk jug by pulling it upward in a straight direction.
Rinse the milk jug with hot water and detergent (if required) to remove all milk residue.
Ensure that no milk residue remains in the milk jug. This is unhygienic and may be harmful to your health. Clean the cover,
silicone ring of the cover, attachment and spring with warm water and a mild washing-up liquid. Dry these components
thoroughly. The loose components, the milk jug with cover, may be cleaned in the dishwasher.
Never immerse the power base in water and/or other liquids. Do not rinse it under the tap. Regularly wipe the outside
with a damp cloth.
Never use detergents and/or abrasives or sharp objects that could damage the coating!

FROTHING MILK

CLEANING AND MAINTENANCE

EN - 12
- 150 ml. Frothing milk expands and the milk frother