Maintenance And Cleaning; Technical Data - Clatronic AT 3260 Instrucciones De Servicio

• Do not use chemicals like benzene, solvents or petroleum ether to clean
the tester.
• Wipe the device only with a slightly moist cloth.
• Do not blow fluids into the mouth piece.
• Do not store the device in rooms with contaminated air.
• Do not modify the tester as this could result in malfunction.
• Sensor:...........................................................................Alcohol oxide tester
• Measuring range: ......................................0.00%o – 1.9%o per mille (PPM)
• Accuracy: ...................................................................+/- 0.1 per mille (PPM)
• Power supply for alcohol tester: ............2x 1.5V AAA ● UM-4 ● R03 battery
• Power supply for the clock: ....................................1x 1.5V LR44 button cell
• Operation time: Warm-up: ...................10 seconds, result after: <5 seconds
• Deviation of clock time: .....................................................+/- 2 seconds/day
• Dimensions: ...........................................................H 100 x W 37 x D 17mm
Battery disposal
Your device contains batteries. When these batteries are
exhausted remark the following:
Attention
► Batteries/accumulators must not be disposed of with common house-
hold waste!
► As a consumer, you are obliged by law to return exhausted batteries /
rechargeable batteries.

Maintenance and Cleaning

Technical Data

59