Operation; Before Initial Use - Waeco MyFridge MF 1W Instrucciones De Uso

Operation

6 Operation
I
NOTE
If the device malfunctions (e.g. due to electrostatic discharge),
you only need to press a function button for the device to function
normally again.
6.1

Before initial use

I
NOTE
Before starting your new device for the first time, you should clean
it inside and outside with a damp cloth for hygienic reasons
(please also refer to chapter "Cleaning and maintenance" on
page 23).
➤ Insert the rechargeable battery pack if the device is to be operated with
rechargeable batteries (see chapter "Inserting/replacing the rechargeable
battery pack" on page 21).
➤ Charge the battery pack as described in chapter "Charging the battery
pack" on page 22.
6.2 Cooling drinks
MyFridge MF1W can either be operated with the rechargeable battery, con-
nected to a DC socket or connected to an AC mains socket.
For operation with rechargeable batteries, the rechargeable battery pack
must be inserted and fully charged. For mains operation, the connection
cable must be connected to the mains socket.
Switching the appliance on
➤ Switch the function switch (fig. 2 2, page 3) to "ON".
➤ Press the "POWER" button (fig. 2 6, page 3) to switch on MyFridge
MF1W.
✓ The display switches on and shows the current cooling temperature in °C.
➤ To cool a bottle, place it into the device standing vertically. The bottle
should be closed whenever this is possible.
20
MF1W
EN