ION Block Rocker Guia De Inicio Rapido página 5

Link Feature
To link two Block Rockers together:
1. Power on each Block Rocker. Ensure both units show "Block Rocker iPA76C" on the rear panel and have the Link
button on the front panel.
2. If necessary, disconnect previous Bluetooth connections by holding down the Bluetooth button for 3 seconds.
3. Press and release the Link button on each Block Rocker. The Link icon will flash and a beeping sound will be heard. It
may take a minute or longer to link. When the Block Rockers are linked, the Link icon will be lit solid on both units.
When the Link icon is flashing, press and hold the Link button 3 seconds to cancel the linking process.
4. Press and release the Bluetooth button on the Block Rocker to be used as the master (left channel).
Navigate to your device's Bluetooth setup screen, find Block Rocker Pair, and connect. This creates a stereo pair. The
5.
unit with the Bluetooth icon is the left speaker, the unit without the Bluetooth icon is the right speaker. Ensure you are
within 100' range of the left speaker and that the right speaker is within 30 feet of the left speaker. The speakers will re-
link automatically the next time they are both powered on.
6. To disconnect linking, hold the Link button on the master Block Rocker for 3 seconds.
To use the free Block Rocker app, navigate Google Play on your Android device or the App Store on your iOS device, and
search for ION Block Rocker. This app provides EQ, sound effects, and more!
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source, musical instrument, or microphone. Also, try
to reduce the overall volume of Block Rocker using the Master Volume knob.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level. This will allow
you to play the music louder before clipping (distortion) occurs. You can also control EQ using the free ION Block Rocker app
for iOS and Android.
If there is a high-pitched whistling noise when using microphones: This is probably feedback. Point the microphone away
from the speaker.
If there is poor AM reception: To adjust AM reception, move entire unit.
If you can't hear the microphone over the music volume: Turn down the music volume from your source.
If you can't play music from a flash drive: The USB ports are only for charging USB devices.
5