Dust Extraction; Working With The Machine; Service And Maintenance; Disposal - Festool RAS 180.03 E-AH Manual De Instrucciones Original/Lista De Piezas De Repuesto

pressed onto the sanding pad and removed after
use.
Note
Only use sanding pads if the Stickfi x adhesive
coating is undamaged.
Before using, check whether the burr layer
has not been damaged (e.g. melted) due to
improper use.
Fiberfi x abrasives
Fiberfi x abrasives can be used on 2F D 180 and
Elastik D 180 sanding pads. Extraction hood AH-
RAS D 180 can be used in combination with sanding
pad 2F D 180 and Fiberfi x abrasives.

7.5 Dust extraction

CAUTION
Breathing in dust damages the respiratory
passage.
• Always connect the machine to a dust extractor.
• When performing work that generates dust,
always wear a dust mask.
You can connect a Festool extractor to the extrac-
tor connector [2-5]. The extractor hose in the
Festool extractor is 27 mm in diameter.
You can adapt the brush ring [2-4] to the respec-
tive working position using the additional rotary
hand grip [3-1].
Always turn the brush ring in the direction of
dust discharge.
8

Working with the machine

Hold the machine with two hands, one on the mo-
tor housing and one on the gear head or additional
handle to ensure safe guidance. Do not overload
the machine by pressing with excessive force! The
best sanding results are achieved with moderate
application pressure. The sanding capacity and
quality are mainly dependent on the selection of
the correct abrasive.
16
9

Service and maintenance

WARNING
Risk of accident, electric shock
• Always pull the plug out of the socket before
performing any type of work on the machine.
All maintenance and repair work which requires
•
the housing to be opened must only be carried
out by an authorised service workshop.
To ensure constant air circulation, always keep the
ventilation openings clean and free of blockages.
The machine is equipped with self-disconnecting
special carbon brushes. If they are worn, power is
interrupted automatically and the machine comes
to a standstill (see Chapter "Electronics").
10

Disposal

Do not throw the power tool in your household
waste! Dispose of the machine, accessories and
packaging at an environmentally responsible re-
cycling centre! Observe the valid national regula-
tions.
EU only: European Directive 2002/96/EC stipulate
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
11

Accessories

Use only original Festool accessories and Festool
consumable material intended for this machine be-
cause these components are designed specifi cally
for the machine. Using accessories and consum-
able material from other suppliers will most likely
affect the quality of your working results and limit
any warranty claims.
Machine wear or your own personal workload may
increase depending on the application. Protect
yourself and your machine, and preserve your
warranty claims by always using original Festool
accessories and Festool consumable material!
The order numbers of the accessories and tools
can be found in the Festool catalogue or on the
Internet under "www.festool.com".