Warranty; Maintenance - KELCH KENOVA set line V224 Manual De Instrucciones

1 Product Liability and Warranty
1.2

Warranty

The devices performance, operating safety and precision is expected to last for many
years. However, this can only be ensured if the regulations regarding operation and
maintenance are complied with.
During the warranty period, any faults that occur will be cleared in accordance with the
warranty terms defined by Kelch GmbH. All consequences of unauthorized alterations
and changes shall be at the expense of the operator. This applies in particular to such
changes that affect the device's safety.
The warranty applies only to original spare parts.
When the delivery arrives at the point of destination, it must be checked immediately for
completeness using the confirmation of order and the delivery note.
These Operating Instructions do not extend Kelch GmbH's term of sale and delivery!
1.3

Maintenance

We strongly recommend that you keep in stock the most important spare parts and parts
that are subject to wear (see section "Spare Parts, Accessories"), since this ensures the
operational availability of the unit.
Please contact Kelch GmbH
Always provide following information when requesting services or ordering parts:
 Article Number
 Affected Assembly
 Serial Number
These details are specified on the type plate of the tool presetter.
KENOVA set Line V224  Kelch GmbH 2013
Kelch GmbH • Werkstraße 30 • D-71384 Weinstadt-Endersbach • Tel. (+49)7151 20522 0 • Fax (+49)7151 20522 11 • info@kelchgmbh.de
for extensive repairs and maintenance of the tool presetter.
Seite 5