Noise Development; Technical Data; Cleaning And Care - AEG MD 5613 Instrucciones De Servicio

English
24
Usage
Before using the water jet you should clean your teeth with a
toothbrush.
1. Insert the nozzle onto the handle as far as possible. Turn
the nozzle so that its opening points to the water stop
switch. Ensure that the nozzle is fixed firmly in position.
2. Fill the water container with water which is hand warm.
Do not fill it with hot water!
3. In order to clean the nozzles, allow water to flow through
the nozzle head (at maximum water pressure) into the
wash basin before and after each time the device is used.
4. Then use the water pressure regulator to select the
desired water pressure. Begin on the smallest setting, es-
pecially if you have problems with bleeding of the gums
or when the water jet is used by children.
5. Unlock the water stop switch on the handle.
6. Lean over the wash basin. Guide the water jet along the
gums, around the teeth.
7. Lock the water stop switch after the application. Set the
water pressure regulator to level I.
8. Turn off the device.
9. Please clean the device as described under "Cleaning
and Care".

Cleaning and Care

WARNING:
• Pull the mains plug from the socket before each clean-
ing.
• Do not immerse the unit base and the mains plug in
water.
CAUTION:
• Do not use any wire brush or other abrasive objects.
• Do not use any sharp or abrasive cleaners.
1. Pour out the remaining water from the water container.
2. Pull the nozzle off the handle. Clean the nozzles under
warm running water. Dry the nozzles and place them onto
the unit base.
3. If you have used water additives, rinse the water con-
tainer with clear water. Then let ca. 300 ml clear water run
through the device as described under "Initial opera-
tion".
4. Dry the handle before you place it back onto the unit
base.
5. Dry off the water container.
6. Clean the unit base with a moist towel. Then wipe it dry.

Noise development

The emisssion value referred to the place of work is below
70 dB (A).
Operating noises
The noise that you perceive during use occur by the water flow.
These noises are unavoidable due to the high performance,
but make no shortage represents.

Technical Data

Model: ................................................................................. MD 5613
Power supply: ............................................................230 V~ ; 50 Hz
Power consumption:.......................................................max. 46 W
Protection class: ....................................................................II (IPX 7)
Net weight: ...............................................................................1.3 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
Disposal
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of electrical equip-
ment in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential eff ects of incorrect dispsal on
the environment and human health.
This will contribute to the recycling and other forms of reutili-
sation of electrical and electronic equipment.
Information concerning where the equipment can be dis-
posed of can be obtained from your local authority.