Technical Data - Olympia TR3210 Manual De Instrucciones

l Trimmer
1. Set the cutting unit down on a level, stable
working base.
Warning: Risk of injury! The trimmer
blade is very sharp! Never take hold of
the trimmer blade.
2. Slide the cutting head [1] to the end of the
rail.
3. Slide the material to be cut under the pres­
sing rail [3], use the positioning raster and
measurement lines [4] to position the ma­
terial and fix the material to be cut with the
flat of the hand.
4. Press the cutting head [1] down lightly and
slide the cutting head [1] along the guide
rail [2] to the other end.
5. Remove the material cut.
Note: Only slide the cutting head [1] back to its
starting position after having removed the cut
material.
l Technical Data
Materials to
be cut
Cutting length
(mm)
Cutting capacity
Sheets (80 g / m²)
Dimensions
(L x W x H mm)
Weight
(kg)
Article number
Paper, card,
photos
320
10
445 x 225 x 80
0,92
3037
l Warranty
Dear Customer,
we are pleased that you have chosen this
equipment.
In the case of a defect, please return the
device together with the receipt and original
packing material to the point-of-sale.
5