Setting The Clock Automatically - Sony XR-1800R Manual De Instrucciones

1
Press (PTY/LOUD) during FM reception
until "PTY" lights up on the display.
The current programme type name appears
if the station is transmitting the PTY data.
"--------" appears if the received station is
not an RDS station or if the RDS data has
not been received.
2
Press (PTY/LOUD) repeatedly until the
desired programme type appears.
The programme types appear in the order
as shown in the above table. Note that you
cannot select "NONE" (Not specified) for
searching.
3
Press either side of (SEEK/MANU).
The unit starts searching for a station
broadcasting the selected programme type.
When the unit finds the programme, the
programme type appears again for five
seconds.
"NO" and the programme type appear
alternately for five seconds if the unit
cannot find the programme type and it
returns to the previous station.
Setting the clock
automatically
By receiving CT (Clock Time) data, the clock of
this unit can be set automatically.
During FM reception, press (2) while
pressing (SEL).
"CT" will be displayed, and the clock will
be set.
To cancel the CT function
Repeat the above procedure.
Notes
• The CT function may not work even though an
RDS station is being received.
• The time set by the CT function may not be exact.
EN
13