Timer Recording; Timer Off; Sleep Timer - Teac CR-H226 Manual Del Usuario

Timer Recording

You are able to set the various external USB storage
devices such as USB flash memory to record program
at the desired time.
Connect the external USB storage device to the unit
beforehand.
1
Select "Timer REC once" or "Timer REC daily"
by pressing the TIMER button on the remote
control unit.
The timer indicator "
display.
2
Prepare for the timer recording.
Tune in a station, etc.
3
Press the STANDBY/ON button to place the
unit in standby.
The standby indicator
STANDBY/ON button blinks at 5-second intervals.
One minute before the set On time, the unit turns
on and starts recording at the On time.
When the Off time is reached the unit will return to
standby.

Timer off

When not using the timer, press the TIMER
button on the remote control unit to select
"Timer off".
The timer indicator "
display.
" and " " lights on the
surrounding the
" disappears from the

Sleep Timer

The power can be switched off after a specified
amount of time.
Press the SLEEP button repeatedly until desired time
appears on the display.
SLEEP-90 (80, 70 ... 10)
The power will be switched off 90 (80, 70 ... 10)
minutes later.
(normal display)
The sleep timer is off.
< The display is dimmed when you set the sleep
timer.
< If you want to check the remaining time, press the
SLEEP button once. The remaining time will be
displayed for 3 seconds, and return to the normal
display.
37