Call Barring - EnGenius EP802 Manual De Usuario

4. The entries are alphabetically sorted and stored as a list in an ascending
order (A to Z) from the top of the list.
5. The first line of LCD display shows name and the 2
phone number. If the phone number is longer than 16 digits, press
OPTION (Right) soft key and select Option 3 "View Number" to view the
complete number.
6. To search for a record:
a. Use
scrolling key to enter the Phone Book mode.
b. Press a key that corresponds to the first character of the name you
are looking for.
c. For example, you are looking for "EnGenius", and then press the
number 3 once.
d. Use
or scrolling key to locate the exact record you are
looking for.
7. To erase phonebook:
a. Use
or scrolling key or the alphabetical
search method to locate the record to be erased or
edited.
b. Press OPTION (Right) soft key to enter option
menu.
c. Press 1 to erase the desinated phone entry.
d. LCD shown "Delete entry?" Press
key to confirm your change.
8. To edit phonebook:
a. Use
or scrolling key or the alphabetical
search method to locate the record to be erased or
edited.
b. Press OPTION (Right) soft key to enter option
menu.
c. Press 2 to edit the desinated phone entry.
nd
line shows the
YES (Left) soft
Name?
_
Caps = *
SAVE
DELETE
~41~
9. Dial from display:
a.
Press or to dial the phone number or Handset ID
displayed.
10. To transfer phonebook:
To transfer phonebook, both parties have to enter the phonebook transfer
mode firstly by following below:
a. Press
OPTION right soft key follow by
to transfer when handset in phonebook mode.
b. For phone sending party, press
i. Either press TX ALL(left softkey) to transfer all phonebook entries
to another handset(s).
ii. Or press TX ONE (right softkey) to transfer one entry to another
handset(s).
iii. Press 2-digit handset ID or group ID, then select all phonebook
entries or one entry to be transferred.
Re : "00" means all handsets
iv. During phonebook transferring, LCD shows "Sending" and 2-digit
countdown on the LCD to indicate the phonebook numbers which
are waiting for sending.
c. For phonebook receiving party, press
i. When entering the receiving mode, LCD shows "Ready".
ii. Start to receive phonebook, LCD shows "Get phonebook from
Ext. # : xx".
iii. A beep emitted when receiving each phonebook.
iv. When the phonebook receiving, 2-digit countdown on the LCD to
indicate the phonebook numbers which are waiting for receiving.
Re: The phonebook transfer through the wireless interface, it may partially
miss transmission by interference.

Call Barring

1. Block the users from dialing the long distance calls or international calls.
And also block the incoming call from outside line or other registered
handset.
You need the password to enter the setting. The default password of
handst is "0000".
5 or or scrolling key
1 to enter sending mode.
2 to enter receiving mode.
~42~