Tv Operating Mode - Promax TV Explorer HD Manual De Usuario

Select the option by pressing the rotary and turn it to switch from OFF to ON.
Press the rotary to accept the change. Now there is a new option:
ASI OUTPUT SOURCE option as explained above, allows selecting the output
between two options: DEMODULATORS and AUXILIAR. The option DEMODULATORS
uses the TS that comes from the internal demodulator which is active at that time. The
AUXILIARY option uses any video file.
5.24

TV Operating Mode

When pressing the
HD / HD
accedes to the TV mode, and tries to demodules on the monitor the currently
LE
video signal on tune.
In the monitor will appear the TV picture with a window on the lower part to show,
for five seconds whenever the signal is analogue; the channel number, the frequency,
the active channel set, the colour system and the TV standard.
NOTE:
The symbol
instrument has detected a saturation condition for analogue signals in
the currently channel on tune.
This symbol also appears, when the colour subcarrier signal (Burst)
does not contain information and therefore the images are shown in black
and white.
Page 88
[10] key from any mode of operation the TV EXPLORER
Figure 65.- Analogue channel monitoring.
in the upper corner of the screen indicates that the
USER'S MANUAL. TV EXPLORER HD / HD
LE
05/2011