Diseqc Command Generator - Promax TV Explorer HD Manual De Usuario

Hold the up arrow
per division.
Hold the down arrow
per division.
5.26

DiSEqC Command Generator

9
DiSEqC ('Digital Satellite Equipment Control') is a communication protocol
between the satellite receiver and the accessories of the installation (switches, LNBs,
etc.) proposed by Eutelsat, with the aim to standardize the diversity of switching
protocols (13 - 18 V, 22 kHz) and to satisfy the demands of the digital TV installations.
In order to define and/or to send a sequence of DiSEqC commands, press the
DiSEqC key [21] on frontal panel. It allows to define the satellite band configuration
parameters and select through SEND function one of the eight predefined programs
which execute basic functions to control an universal switch with two or four inputs, by
means of the rotary selector
Whenever a DiSEqC program is sent, the commands that correspond to the
equipment status in relation to the Horizontal or Vertical polarization and High or Low
frequency band are also sent. This allows assuring that the installation status is the one
indicated by the equipment.
The COMMANDS option from DiSEqC menu allows to execute any of the
following commands:
9
TM
DiSEqC is a trademark of EUTELSAT.
Page 94
[6] for half a second to change the vertical axis to 10 dB
[6] for half a second to change the vertical axis to 5 dB
[1].
Figure 70.- DiSEqC command screen.
USER'S MANUAL. TV EXPLORER HD / HD
LE
05/2011