Shunting Furniture; Removing The Rolling Supports; Troubleshooting; Cleaning - Kompernaß KH 3277 Instrucciones De Uso

6. To lower the furniture piece onto the roller base
, slowly lift the lever arm
e
D
7. Remove the lever arm
8. Repeat the above procedure for the opposite
side of the furniture piece.

Shunting furniture

1. Adjust both of the rolling supports
wheels all face in the same direction.
2. Release the parking brakes
supports .
e
3. Pull/push the furniture piece to the desired location
with the assistance of the rolling supports

Removing the rolling supports

Note:
To avoid an irregular elevation, always place the
lever arm in the middle of the side to be lifted.
q
1. Push the swivelling head
under the furniture and in the middle of it.
(D).
q
.
q
so that the
e
on the rolling
y
.
e
of the lever arm
u q
Note:
Hold the lever arm
you will require the least effort.
2. To lift the furniture, slowly press the lever arm
down.
3. Hold the lever arm
4. Remove the rolling supports
5. To lower the furniture piece, slowly lift the lever
arm .
q
6. Remove the lever arm
7. Repeat the above procedure for the opposite
side of the furniture piece.

Troubleshooting

The furniture piece is very difficult to shunt.
• Adjust the rolling supports
wheels are facing in the same direction.
• Check to ensure that the parking brakes
the rolling supports have been released.
The furniture piece tips easily.
• Place the rolling supports
corners of the furniture piece. Thereby, the furniture
piece should be placed fully on the bearing sur-
faces of the rolling supports

Cleaning

Important
It is possible to damage the furniture transporter
and the rolling supports
When cleaning the lever arm
supports NEVER use benzene, solvents or other
e
aggressive cleaning agents that could damage the
paint.
Clean the lever arm
only with a moist cloth.
- 12 -
at the hand grip w . With this
q
pressed down.
q
.
e
.
q
so that all of the
e
under the extreme
e
.
e
.
e
and the rolling
q
and the rolling supports
q
q
on
y
e