6. REMOTE CONTROL
Remote control unit
Inserting the Batteries
1.Turn the remote control unit over, then slide the
rear cover in the direction of the arrow.
2.Insert the AA (SUM-3, IECR-6/1.5V) batteries
that came with the remote control unit facing in
the directions shown in the figure, then close the
rear cover.
Notes:
Using batteries improperly can cause them to
explode. Take note of the following points:
• When replacing batteries, replace both batteries
with new ones.
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or flames.
• Dispose of spent batteries properly.
10
DXZ835MP
[ FUNC ]
[
],[
]
[ ISR ]
[ MUTE ]
[ SCN ]
[ RPT ]
Receiver for remote control unit
Operating range: 30˚ in all directions
Signal transmitter
[ DUAL ZONE ]
[
],[
]
[ BAND ]
[ DISP ]
[ RDM ]
AA (SUM-3, IECR-6/1.5V)
Batteries
Rear side
Rear cover