Remote Control; Turning The Unit On And Selecting A Source; Adjusting The Volume; Turning The Unit Off - Pioneer DEH-P40MP Manual De Instrucciones

Section
02 Basic Operations

Remote control

Operation is the same as when using the but-
tons on the head unit. See the explanation of
the head unit about the operation of each but-
ton with the exception of PAUSE, which is ex-
plained below.
e PAUSE button
Press to turn pause on or off.
f SOURCE button
This unit is turned on by selecting a source.
Press to cycle through all the available
sources.
g VOLUME button
Press to increase or decrease the volume.
Turning the unit on and
selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in the unit (refer to page 14).
% Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
Tuner—Television—Built-in CD player—
Multi-CD player—iPod—External unit 1—
External unit 2—AUX1—AUX2
Notes
! In the following cases, the sound source will
not change:
— When there is no unit corresponding to the
selected source connected to this unit.
— When there is no disc in the unit.
— When there is no magazine in the multi-
CD player.
— When the AUX (auxiliary input) is set to off
(refer to page 35).
8
En
! AUX1 is set to on by default. Turn off the AUX1
when not in use (refer to Switching the auxili-
ary setting on page 35).
! External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
! When this unit's blue/white lead is connected
to the vehicle's auto-antenna relay control
terminal, the vehicle's antenna extends when
this unit's source is turned on. To retract the
antenna, turn the source off.

Adjusting the volume

% Use VOLUME to adjust the sound
level.

Turning the unit off

% Press SOURCE and hold until the unit
turns off.