Vacuum Packing In Glass Jars; Bottle Caps; Vacuum Packing With Cap Attachment - Magic Vac Genius Instrucciones De Uso

WARNING: DO NOT LEAVE THE LID WITH LOCKS ENGAGED WHEN THE UNIT IS NOT IN USE.
tents have been packed in a vacuum.
7 Vacuum packing in Family MAGIC VAC
Multipurpose containers ideal for storage of frequently
used products such as dry and fragile foods; powder
foodstuffs; fresh, pureed or strained fruit and vege-
tables. Their transparency and design makes them
attractive to display on kitchen shelves while ensuring
that their contents are clearly visible.
- Fill the container leaving at least 3 cm of room
between the contents and upper rim and position the
lid on the container.
- Connect the container lid to the air inlet (3) of the
appliance by means of the connection hose (13) (fig.
P).
- Lock the lid (5) by pushing the vacuum locks (6) and
press the START/STOP/MAN SEAL switch (1); the
appliance will automatically carry out a vacuum
packing cycle and turn off on its completion.
- Remove the hose from the container lid.
- Press the central button to open the containers (14)
(fig. P).
8 Vacuum packing in glass jars sealed with metal
caps (Leifheit type)
Use the large-sized cap attachment to pack foods in
large-mouthed glass jars with a metal cap. A small-
sized cap attachment is also available for narrow-
mouthed jars sealed with metal caps.
- Fill the container leaving at least 3 cm of room
between the contents and upper rim.
- Connect the cap attachment (15) to the air inlet (3) of
the appliance by means of the connection hose (13).
Place the cap attachment directly on the jar with the
metal cap only (16) and press down, making sure it
fits correctly (fig. Q).
- Lock the lid (5) by pushing the vacuum locks (6) and
press the START/STOP/MAN SEAL switch (1); the
appliance will automatically carry out a vacuum
packing cycle and turn off on its completion. Make
sure that the cap attachment holds firmly, keeping it
pressed with the your hand.
- Disconnect the hose from the cap attachment.
Remove the cap attachment from the jar.
- Apply the ring (17) supplied with the jar and screw it
down all the way (fig. Q).
- To open a glass jar vacuum-sealed with a metal cap,
use the cap opener provided (the side with writing
should be turned up). Position the cap opener as
shown in figure R and gently pry open the cap until
the vacuum is released. Remove the metal cap. This
accessory allows you to reuse the cap.
9 Vacuum packing with MAGIC VAC
The MAGIC VAC ® Bottle Cap may be used to seal partly
filled bottles of wine or non-fizzy beverages. Using the
Bottle Cap will allow you to create a vacuum inside the
bottle so as to slow down oxidisation and preserve the
freshness and flavour of its contents for a longer time.
OPERATING INSTRUCTIONS
® containers

bottle caps

®
17
- By means of the connection hose (13) connect the
air inlet (3) of the appliance to the MAGIC VAC
Bottle Cap (18) (fig. S). Press the Cap firmly into the
bottle.
- Lock the lid (5) by pushing the vacuum locks (6) and
press the START/STOP/MAN SEAL switch (1); the
appliance will automatically carry out a vacuum
packing cycle and turn off on its completion.
- Disconnect the hose from both the Bottle Cap and
the appliance immediately.
- To open a bottle sealed with the MAGIC VAC
Cap, simply pull the cap out of the bottle. You will
hear the air rushing into the bottle.
10 Vacuum packing with Cap Attachment in MAGIC
VAC ® Executive containers or in containers sealed
with MAGIC VAC Universal Caps with the previous
®
model of knob
To use the Cap Attachment in MAGIC VAC
containers or in containers sealed with MAGIC
VAC ® Universal Caps with the previous model of
knob, read the instructions supplied in our web page
www.flaemnuova.it
®
Bottle
®
Executive
®