Cleaning And Maintenance; Technical Specifications - Luxibel LX301 Manual Del Usuario

7. Remote Controller (optional)
The controller allows you to control the functions more easily. Connect the LX302 to the fixtures using a
3-pin XLR cable. The controller is able to control up to 20 fixtures. Remove the terminator from the last
LX301 in the chain when using the LX302 controller. Install a signal splitter after the first fixture if
necessary.
1 blinder effect button
2 intensity fader
3 run/stop toggle switch
4 chase/sync toggle switch
5 flash rate fader
6 single flash button
8.

Cleaning and Maintenance

•
All screws should be tightened and free of corrosion.
•
The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in
mounting supports, do not change the location of the connections...
•
Moving mechanic parts must not show any signs of wear and tear.
•
The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
•
Disconnect the device from the mains prior to maintenance activities.
•
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
•
There are no user-serviceable parts.
•
Contact your dealer for spare parts if necessary.
9.

Technical Specifications

power supply
lamp
DMX input
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our
website www.luxibel.com.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
V. 01 – 08/06/2012
230VAC / 50Hz
Philips Xenon discharge lamp XOP 15-OF (LAMP3000ST, incl.)
3 or 5-pin XLR
245 x 425 x 240mm
7.5kg
LX301
7 ©Velleman nv