Dometic Waeco SinePower MSI2312T Instrucciones De Montaje página 51

SinePower
Switching to energy-saving mode
You can set the energy-saving mode using the S4, S5 and S6 dip switches.
In this way, the battery you connect to the inverter is not discharged as quick-
ly.
The inverter operates in energy-saving mode as long as the required power
is below the set level. If the required power exceeds the set level, the inverter
works in normal mode.
The values to be set on your inverter can be found in the following table:
Energy-saving mode
Off
2%
3%
4%
5%
6%
7%
8%
Defining settings
Using the S8 dip switch you can define whether the parameter of the setting
should be made using the connection for the remote control or the dip switch-
es.
Parameter
Remote control connec-
tion
Dip switch
EN
DIP switch
S4 S5
Off Off
On Off
Off On
On On
Off Off
On Off
Off On
On On
Dip switch
S8
Off
On
Using the inverter
S6
Off
Off
Off
Off
On
On
On
On
51