Descargar Imprimir esta página

Proper Use; Disposal Information; General Information - Bosch BGS 2 Serie Instrucciones De Uso

Ocultar thumbs Ver también para BGS 2 Serie:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 62

Proper use

„ Only connect and use the vacuum cleaner in ac-
cordance with the specifications on the rating plate.
„ Never vacuum without the dust bag or dust container,
motor protection or exhaust filter.
= This may damage the vacuum cleaner.
=>
„ Always keep the vacuum cleaner away from your head
when using nozzles and tubes.
= This could cause injury!
=>
„ When vacuuming stairs, the appliance must always be
positioned below the user.
„ Do not use the power cord or the hose to carry or
transport the vacuum cleaner.
„ For safety reasons, if this appliance's mains power
cable becomes damaged, it must be replaced by the
manufacturer, their after-sales service department or
a similarlyqualified person.
„ If using the appliance for longer than 30 minutes, pull
out the power cord completely.
„ When disconnecting the appliance from the mains,
pull on the plug itself to remove it; do not pull on the
power cord.
„ Do not pull the power cord over sharp edges or allow
it to become trapped.
„ When the cable is being automatically rewound, en-
sure that the mains plug is not thrown towards per-
sons, body parts, animals or objects.
= Use the mains plug to guide the power cord.
=>
„ Pull out the mains plug before carrying out any work
on the vacuum cleaner.
„ Do not operate the vacuum cleaner if it is damaged.
Unplug the appliance from the mains if a fault is de-
tected.
„ For safety reasons, only authorised after-sales service
personnel are permitted to carry out repairs and fit
replacement parts to the vacuum cleaner.
„ Protect the vacuum cleaner from the weather, moistu-
re and sources of heat.
„ Do not pour flammable substances or substances con-
taining alcohol onto the filters (dust bag, motor pro-
tection filter, exhaust filter, etc.).
„ The vacuum cleaner is not suitable for use on con-
struction sites.
= Vacuuming up building rubble could damage the
=>
appliance.
„ When not in use, switch off the appliance and pull out
the mains plug.
„ At the end of its life, the appliance should immediately
be rendered unusable, then disposed of in an appro-
priate manner.
!
Please note
The mains socket must be protected by at least a
16 amp circuit breaker.
If a circuit breaker is tripped when you switch on
the vacuum cleaner, this may be because other
electrical appliances which have a high current
draw are connected to the same power circuit.
To prevent the circuit breaker from tripping, select
the lowest power setting before switching the
appliance on, and increase the power only once it is
running.
4

Disposal information

„ Packaging
The packaging is designed to protect the vacuum
cleaner from being damaged during transportation.
It is made of environmentally friendly materials and
can therefore be recycled. Dispose of packaging
that is no longer required at an appropriate recyc-
ling point.
„ Old appliance
Old appliances still contain many valuable mate-
rials. Therefore, please take appliances that have
reached the end of their service life to your retailer
or recycling centre so that they can be recycled.
For current disposal methods, please enquire at a
retailer or your local council.
„ Disposal of filters and dust bags
Filters and dust bags are manufactured from
environmentally friendly materials. Provided they
do not contain substances that are not permitted
in household waste, you can dispose of them with
your normal household waste.

General information

„ Accessories
Your accessories (nozzle, suction pipe, etc.) may
look different from but work in the same way as
those depicted in the illustrations in this instruc-
tion manual.
Notes on the energy label
This vacuum cleaner is a general purpose vacuum
cleaner.
To achieve the declared energy efficiency and cleaning
performance class on carpet and hard floor, please
use the interchangeable universal nozzle.
The values provided on the energy label have been
determined according to the prescribed measuring
process (in accordance with EN60312-1).

Publicidad

loading

Este manual también es adecuado para:

Bgb2 serieIbgl2 serieBgn2 serieBgl2b1108