Koenic KVR4120 Manual De Instrucciones página 18

English
Assembly
Wall bracket
Fig. If needed, attach the wall bracket to
1
a wall. Please note the distances and
dimensions.
The dimensions of the required dowels
Fig.
2
and screws (included) can be found in
the overview picture. When mounting
on the wall, the distance between the
holes must be maintained. Mark the
drill holes beforehand.
Note: Before screwing on the wall bracket,
make sure that there is a socket for the
charger.
Warning!
Make sure there are no power lines or other
wires or pipes in the wall where you want
to drill holes for the wall bracket. There is
danger to life if you drill a live cable!
The minimum height of the wall bracket
Fig.
3
must be selected so that the floor
nozzle can hang freely downwards.
Crevice and upholstery nozzle can also
Fig.
4
be hung on the wall bracket.
Charging batteries
Fig. Slide the battery into the device. Make
5
sure it is locked in place. It will be
indicated by a click sound.
Fig. Plug the charger into the socket. Plug
6
the charging plug into the charging
socket.
18
IM_KVR4120_180806_V06_HR.indb 18
The charging indicator LEDs flashing in blue
indicate that the battery is being charged. The
indicator continously shines in blue, when the
battery is fully charged.
LED indicator
LED Condition
1 LED on, During operation, when battery
flashing level is low
Running light,
During charging
3 LEDs
Steady on, 3 Charging completed. Fully
LEDs charged
Fig. Connect the floor nozzle to the lower
7
end of the suction tube and then
connect the tube to the vacuum
cleaner.
Upholstery nozzle and crevice nozzle
Fig. Both nozzles can either be connected
8
directly to the vacuum cleaner or onto
the suction tube end. When attaching
them, always insert the respective
nozzle as far as possible so that it
snaps into place.
To vacuum upholstered furniture,
mattresses, pillows, curtains, etc., use
the upholstery nozzle. The brush can
be pushed back whereby a lint brush is
available.
To vacuum wrinkles, joints and corners,
use the crevice nozzle.
Vacuuming
Using handstick vacuum cleaner
Press the On/Off button to turn on the
Fig.
9
product. The operation indicators on
the floor noozle light up and indicate
that the brush roller is turning.
6/8/18 2:38 pm