Snooze Function - Beurer WL 32 Manual De Instrucciones

Alarm 1
switched off
Alarm 1 switched on,
beep selected as alarm
6.3 Switching off the alarm
• When the alarm sounds, press the
The alarm is now switched off and will sound again on the
following day at the set time.
6.4 Permanently deactivating the alarm
• To deactivate alarm 1, press the
• To deactivate alarm 2, press the
• Now press the button until the note symbol ( ) and
bell symbol ( ) disappear from next to the number 1 or 2
on the screen.
• Confirm using the
deactivated.
Alarm 2
switched off
Alarm 2 switched on,
radio selected as alarm
button.
button once.
button twice.
button. Alarm 1 or 2 has now been

6.5 Snooze function

When an alarm sounds, it can be stopped temporarily by
pressing the Zz button. The alarm will sound again once the
preset snooze duration has elapsed. For information on set-
ting the snooze duration, see chapter "6.1 Setting the time
and snooze duration".
6.6 Sunrise function
Having set an alarm, you can also wake up to a sunrise
simulation in addition to the alarm. With this function, the
LED light gradually becomes brighter.
Note
For this function, use the mains adapter provided.
• Press and hold the Zz button for approx. 5 seconds.
"15" will flash on the display.
• Using the  /  buttons, set the desired simulated sunrise.
15 = Sunrise simulation begins 15 minutes before the set
alarm time.
30 = Sunrise simulation begins 30 minutes before the set
alarm time.
OFF = Sunrise simulation deactivated. The lamp symbol
( ) disappears from above the time on the display.
• To confirm your selection, press the Zz button.
6.7 Lamp function/mood light with change of colour
The wake-up light can also be used as a normal lamp or as
a mood light with change of colour.
18