Cleaning And Maintenance - Omnitronic TM-250 Manual Del Usuario

5.2 Start-up
Screw the microphone lead into the microphone input socket.
Attach the pocket transmitter via the belt clip to the belt or waistband.
With the operation selector, you can switch the device on and off. When switching the device on, the LED
shortly lights up. In this case, the power supply is sufficient.
When the battery is getting weaker, the LED is permanently illuminated. In this case, the batteries have to be
replaced.
If the LED does not light up when switching on, there is either no battery inserted or the poles are wrong.
If the signal-input at the receiver is too high, you can attenuate the signal output level via the Sensitivity-
selection: use a screwdriver in order to turn the control until the desired sensitivity is adjusted.
If the device is not used, switch it off. If the device will not be used for a longer period of time, remove the
batteries in order to avoid battery leakage.

6. CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the battery. Maintenance and service operations
are only to be carried out by authorized dealers.
In order to replace the battery please refer to "Inserting/exchanging batteries".
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
12/23 13075005_V_1_0.DOC