Technical Data; Information For Environmental Protection/ Disposal - IKRA IEH 2500 Manual De Instrucciones

9. Never clean the shredder with a jet of water or by
rinsing. Make sure that no water is allowed to enter
into the shredder.
10. Use only the recommended accessories and attach-
ment for this shredder.
Storage
In order to protect the shredder from corrosion during
extended storage, apply some environmentally friendly
oil to the blade.
Make sure that the garden shredder has been thoroughly
cleaned before storing it in a clean, dry place out of the
reach of children.
Transport
When transporting the tool by car, it must be positioned
so that it poses no danger, and secured.
Repair Service
Attention! Electrical repairs may only be carried
out by a skilled electrician or a customer ser-
vice workshop!
If you send the machine to us for repair, please describe
the fault.
Spare parts
If you need accessories or spare parts, please contact our
Service department.
When working with this tool, do not use any accessory
parts other than those recommended by our company.
Otherwise the operator or others in the vicinity could suffer
serious injuries, or the tool could be damaged.
Information for environmental protection/
disposal
Dispose of the machine properly after it is worn out. Dis-
connect the mains cable in order to prevent misuse. Do
not dispose of the machine with the household waste. In
the interest of environmental protection, take it to a coll-
ection point for electric machines. Your responsible local
authority can provide you with addresses and operating
times. Also take the packaging materials and worn out
accessories to the appropriate collection points.
Only for EU countries
Do not discard electric tools in the household
waste!
In accordance with European Directive 2012/19/EC on
waste electrical and electronic equipment and its im-
plementation in national law, waste electric tools must
be collected separately for environmentally-compatible
re-use.
Recycling alternative to the return invitation:
Instead of returning the electric equipment, the owner is
alternatively obligated to take part in the proper recycling
in the case of relinquishment of ownership. The waste
GB | Operating Instructions
equipment can also be taken to a collection facility which
disposes of it in the sense of the national recycling ma-
nagement and waste acts. This does not pertain to the
accessory parts and auxiliary equipment without elec-
trical components accompanying the waste equipment.

Technical Data

Electric Garden Shredder IEH 2500
Nominal voltage
Nominal frequency
Nominal power
No-load speed
Max.branch diameter
Collecting container
Weight
Sound pressure level L
Measured
sound power level L
Guaranteed
sound power level L
Service life S6 40% (full load: 4 min., no-load: 6 min.)
Class of protection II; Degree of protection IP24
Technical and visual changes can be made during the
course of the further development and without prior no-
tice. All information given in these instructions for use are
therefore given without guarantee. Legal claims, which
are based on the instructions for use can therefore not
be made.
Note: The above specifications are the MAXIMUM ca-
pacities of the tool. The maximum branch diameter de-
pends on the hardness of the wood.
Warranty
For this tool, the company provides the end user - inde-
pendently from the retailer's obligations resulting from
the purchasing contract - with the following warranties:
The warranty period is 24 months beginning from the
hand-over of the device which has to be proved by the
original purchasing document. For commercial use and
use for rent, the warranty period is reduced to 12 months.
Wearing parts and defects caused by the use of no fitting
accessories, repair with parts that are not original parts
of the manufacturer, use of force, strokes and breaking
as well as mischievous overloading of the motor are
excluded from this warranty. Warranty replacement does
only include defective parts, not complete devices. War-
ranty repair shall exclusively be carried out by authorized
service partners or by the company's customer service.
In the case of any intervention of not authorized person-
nel, the warranty will be held void.
All postage or delivery costs as well as any other subse-
quent expenses will be borne by the customer.
GB-7
V~ 230-240
HZ 50
W 2500
rpm 4500
mm 40
Liter 50
kg 10
dB(A) 96,7
pA
dB(A) 104,5 (K=3,0)
WA (2000/14/EG)
dB(A) 106
WA (2000/14/EG)
(K=3,0)