Medisana MCS Instrucciones De Manejo página 24

GB
3 Operating
16
Please note that changing the timer setting makes the timer start
to count again from the beginning.
To avoid overheating the device, select the maximum massage
duration at the beginning of the massage and do not change it
again during the massage.
Do not use the massage device for longer than 15 minutes and
then allow it to cool. Using the device for longer can over-
stimulate the muscles and cause tension instead of relaxation.
The massage can be finished at any time by pressing the
On/off button.
• Demo function:
Press the DEMO button
massage on the different back setting with different functions. The LEDs
schow the current massage regions and functions. The device will stop once
all functions worked.
• To switch off the device:
On/Off button
Press the
massage heads travel back down to the "Park" position. When this position
is reached, the LED extinguishes. If you press the
one of the massage functions is switched on, the vibration motors just
stop immediately. First the massage heads travel downwards to the "Park"
position. The LED flashes meanwhile and then extinguishes.
• After each use, switch the device off using the O
the plug from the mains socket. Always store control unit
, the device starts automatically with the 3D
power LED begins
. The
On/Off button
n/Off button
to flash and the
when
and remove
in its bag .