Orbegozo RRW 600 Manual De Instrucciones página 29

RRW 600 1200 1500 2000
2. Make four holes, insert wall plugs and screw the upper brackets to the wall (Fig 4)
3. Screw the bottom to the bottom of the emitter.
4. Hang the thermal emitter and mark the point to be drilled bottom bracket (Fig 5).
5. Lift the transmitter and make the hole.
6. Hang transmitter again and screw the bottom bracket to the wall so that the sender is completely
fixed (Fig 6
Screw
wall
wall
floor
wall
Hang up
screw
wall
wall
29