Playing Music Via Usb - AEG SR 4360 BT Instrucciones De Servicio

NOTE:
• To disconnect an existing Bluetooth connection,
keep the /PAIR button (11) pressed down. The
PAIR control lamp flashes blue.
4. Now enter the password "0000" in your player, depend-
ing on the device manufacturers, model, and software
version.
If pairing was done successfully, the PAIR control lamp lights
up blue. For the further procedure, please refer to the user
manual of the playback unit. If possible, adjust the volume of
the external unit to a comfortable level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• In case of problems with the registration of a replay
device, deactivate the WiFi-/ and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If a mobile phone on which you are playing music
receives a call, the music will be interrupted. However,
the sound is not played back by the device. After you
have ended the call, the devices are connected to each
other again and playback continues.

Playing music via USB (7)

This device has been developed in line with the latest techni-
cal advances in the USB field. The wide range of different
USB storage devices of all types which are currently on the
market, unfortunately do not allow us to guarantee full com-
patibility with all USB storage devices. For this reason, in rare
cases there may be problems in playing back files from USB
storage devices. This is not a malfunction of the device.
1. Press the FUNC button (23) repeatedly until "USB" is
shown on the display.
2. Connect a USB storage device directly into the port.
Playback will automatically start after a few seconds.
For operation, please refer to the section "Description of the
control buttons".
NOTE:
• Always directly connect a USB storage medium to the
USB port to prevent any malfunctions.
• The USB port is not designed for charging external
devices.
CAUTION:
Switch the device to a different operating mode before you
remove the USB storage device.
Description of the control buttons
NOTE:
Not all the functions may be supported depending on the
playback device.
/PAIR (11)
You can briefly interrupt and resume playback using this
button. The notification on the display flashes. Pressing again
continues playback.
/ (12)
During music playback:
With you can jump to the next or previous track etc.
• If the button is kept pressed down, the machine starts to
search through the tracks.
The button can be used as follows:
Press once = This starts the current track again from
the beginning.
Press twice = This jumps back to the previous track.
Press three times = This plays the song before etc. If the
button is kept pressed down, the
machine starts to search through the
tracks.
(9)
The playback is stopped.
PROG/P-MODE (22)
• In stop mode for programming any order of tracks (see
the section on "Programmed Play").
During the playback of an audio CD:
Press once = the current track is repeated continu-
ously. The symbol " " appears on the
display.
Press twice = the whole CD is played continuously.
The symbol " ALL" appears on the
display.
Press three times = All the music tracks are played back in
random order. The notification "RAN"
appears on the display.
English
49