Product Overview; Safety Precautions; Know Your Chain Saw - Cramer 2000586 Manual De Instrucciones

Product Overview

EN
Your machine has been engineered and manufactured to high standard for
dependability, ease of operation, and operator safety. When properly cared for, it
will give you years of trouble-free performance.

Know your Chain saw

Packing List
1 Chain saw
2
Bar and chain
3 Scabbard
The recommended ambient temperature range:
ITEM
Chain saw storage Temperature range
Chain saw operation temperature
range
Battery Charging Temperature Range
Charger Operation Temperature Range
Battery storage Temperature range
Battery Discharging temperature
Range
2
cramer.eu
4 User's manual
5
Wrench
TEMPERATURE
-4 ˚F (-20 ˚C) ~ 158 ˚F (70 ˚C)
1.4 ˚F (-17 ˚C) ~ 104 ˚F (40 ˚C)
41˚F (5°C) ~ 125.6 ˚F (52 ˚C)
39˚F (4°C) ~ 104 ˚F (40 ˚C)
1 year: 32˚F (0°C) ~ 73 ˚F (23 ˚C)
3 month: 32˚F (0°C) ~ 113 ˚F (45°C)
1 month: 32˚F (0°C) ~ 140 ˚F (60 ˚C)
6.8 ˚F (-14 ˚C) ~ 149 ˚F (65°C)

Safety Precautions

Carefully read all the safety warnings and instructions in this
manual before operating this chain saw. Save this operator's
manual for future reference.
These chain saws conform to CE safety standards and directives
concerning electromagnetic compatibility, machines and low
voltage.
Intended use
This chain saw is designed for cutting branches, trunks, logs and beams of a
diameter determined by the cutting length of the guide bar. It is only designed to
cut wood.
It is only to be used by adults.
Do not use the chain saw for any purpose not listed above.
It is not to be used by children or by persons not wearing adequate personal
protective equipment and clothing.
Residual risks:
Even with the intended use of the appliance, there is other risk which cannot be
prevented. According to the type and construction of the appliance, the following
potential hazards might happen:
•
Contact with exposed saw teeth of the saw chain (cutting hazards).
•
Access to the rotating saw chain (cutting hazards).
•
Unforeseen, abrupt movement of the guide bar (cutting hazards).
•
Flung out of parts from the saw chain (Cutting / injection hazards).
•
Flung out of parts of the work piece.
•
Inhalation of work piece particles.
•
Skin contact with the lubrication oil.
• Loss of hearing, if no ear protection is used during work.