De’Longhi Pinguino PAC 10 Instrucciones De Uso página 8

5751009900 17-04-2003
AIR CONDITIONING WITH INSTALLATION
Pinguino can also be semi-permanently
installed (fig. G).
12 inch.
30 cm
G
To install, proceed as follows:
• Make a hole in a wall that goes through to
the outside or through the pane of a win-
dow. Respect the height and dimensions
given in figures H and I.
in a window
in the
pane
wood sill
of a win-
dow
H
• Fit the flange
19
• Fit the tube
back of the unit (figure A, page 6).
• Attach the end of the tube
18
flange as shown in the figure I.
The unit must only be used with the air outlet tube
and use procedures specified in this manual absolves the manufacturer from all liability.
8
15:07 Pagina 8
S e t t i n g u p
12 inch.
30 cm
in the wall: for
optimum results,
insulate the sec-
tion of the wall
with suitable
insulating mater-
ial.
18
supplied to the hole.
to the coupling on the
19
to the
19
When the tube is not attached, close the
18
hole with the stopper
NOTE:
When the unit is installed semi-permanently,
we recommend leaving a door slightly open
(0.5 in. '1 cm' is enough) to ensure an ade-
quate exchange of air.
provided. Failure to observe the set up
19
I
MAX115 cm 46 inch.
MIN 50 cm 20 inch.
.