Speedlink Powerstixx 2.1 Manual De Instrucciones página 11

Master (-/+):
Sub
Power On/Off
(back of Subwoofer)
3. How to fit or change batteries:
1. Using a screwdriver, remove the screw on the back of the remote
control (point 1 of diagram).
2. Before you remove the battery compartment, lay the remote control
on a suitable surface with function buttons pointing upwards (point 2
of diagram). Pull out the battery compartment at the bottom end of
the remote control (point 3 of diagram).
Controls the overall
volume of the system
Controls the bass
sound of the
subwoofer
Power switch to
completely switch off
the system
11
Depending on the
selected sound source
(Input 1 or 2), the
LED flashes blue or
red when the volume
is altered.
Depending on the
selected sound source
(Input 1 or 2), the
LED flashes blue or
red when the bass is
altered.
After switching the
system off and then
on again, Input 1
is automatically
activated. The LED
flashes blue several
times and goes out.
Fig. 3
D
GB
F
E
I