Before Commissioning - IKRA HHTI 45 Instrucciones De Manejo

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 65
- before servicing
- when changing accessories such as
blades
- when clearing jammed material from
blades
- when moving from one worksite to an-
other.
6. Do Not Force Pole Trimmer – It will do
the job better and with less likelihood of
a risk of injury at the rate for which it was
designed.
7. Do Not Abuse Power Cord – Never carry
Pole Trimmer by power cord or yank it to
disconnect from receptacle. Keep power
cord from heat, oil, and sharp edges.
8. Make sure the blades are not touching any-
thing before starting the telescoping hedge
trimmer.

Before commissioning

Unpacking
1. Remove the telescoping hedge trimmer and every-
thing else from the packaging.
2. If any parts are damaged or missing, do not operate
this product until the parts are replaced. Failure to
heed this warning could result in serious personal
injury.
Packing List:
• Telescoping hedge trimmer
• Cutter Blade Cover
• Operator's manual
Assembly
1. Rotate the knob (14) of the telescopic tube anticlock-
wise ( ) to loosen the tube.
14
2. Rotate the knob (14) of the head tube clockwise ( )
to tighten the head part.
14
Operation pole hedge trimmer
WARNING: Read and understand this owner's
manual before operating Pole Trimmer. Make cer-
tain you read and understand all Safety Warnings
of this manual. Improper use of this Pole Trimmer
can result in severe injury or death from fire, electric
shock, or body contact with moving parts.
GB-10

Publicidad

Tabla de contenido
loading

Tabla de contenido