Samsung RF3OHB Serie Manual Del Usuario página 20

..0..
The Alarm button serves two purposes:
- To turn the door open alarm on and off
- To reset the water filter life indicator.
1. Door Alarm Function
If the door alarm is set to On, an alarm
beeps if any refrigerator door is left open
for more than three minutes. The beeping
stops when you close the door. The door
alarm function is pre-set to On in the
factory. You carl turn it off by pressing and
then releasing the Alarm button. You can
turn it back on in the same fashion. The
icon lights up when the function is on.
When the Door Alarm function is on and
the alarm sound is triggered, the Door
Alarm icon will blink while the alarm
sounds.
2. Water Filter Lift Indicator Function
After you replace the water filter, touch and
hold this button for 3 seconds to reset the
water filter life indicator. When you reset
the water filter life indicator, the Filter icon
on the panel turns OFF.The Filter icon will
turn red to let you know it is time to change
the water filter after six months (about 300
gallons). Some areas have large amounts
of lime in their waler, which causes the
water filter to clog more quickly. If this
is the case in your area, you will have to
change the filter more frequently than every
six months.
Lighting button serves two purposes:
- To turn the dispenser light on and off
- To switch the temperature units
between °C and °F
1. Light Function
Touching the Lighting button turns on the
Dispenser LED lamp in continuous mode
so that it stays on continuously. The button
also lights up. If you want the Dispenser
lamp to come on only when some one
uses the dispenser, press the Lighting
button to turn the continuous mode off.
2. To switch the temperature units
between °C and °K
Touch and hold this button for 3 seconds
to select the temperature display you want.
Each time you press and hold the button,
the °C and °F temperature modes alternale
and the °C or°F icon lights up, indicating
your selection.
The Fridge button serves two purposes:
- to set the Fridge to your desired
temperature.
- to turn the Power Cool function on
and off.
1. to set the Fridge temperature, press
the Fridge button.
You can set the temperature between
34 °F (1 °C) and 44 °F (7 °C).
2. Power Cool function
Touch and hold this button for 3 seconds
to decrease the time needed to cool
)roducts in the Refrigerator. It can be
helpful if you need to quickly cool easily
spoiled items or if the temperature in
the fridge has warmed dramatically (For
example, if the door was left open).
iiiiiiiiii!i!i!i!i!ii!_i_i_i!ii_iiii_!!i!
The Ice OFF button serves two purposes:
- to turn the Ice maker on and off
to turn the Child Lock Function on and
off.
1. Ice OFFFunction
If you don't want to make more ice, press
the Ice OFFbutton.
2. Child Lock Function
Touch and hold this button for 3 seconds
to lock the display, the Flex Zone panel,
and the dispenser buttons so the buttons
can not be used.
When the Child Lock is on, the refrigerator
does not dispense ice or water even if you
press the Dispenser Lever.
The child lock icon lights up to indicate
/ou've activated the child lock function.
Press 3 seconds to unlock.
Engl sh- 20