Bonnet Neve MULTIWINE PLUS Serie Instrucciones De Uso página 36

TEMPERATURE SETTING AND CONTROLS
Each refrigerating appliance is provided with an electronic control for automatic maintenance of the appropriate
pre-established temperature inside the tank.
This temperature adjuster is gauged by the factory and should not be touched by the user.
Only if the average internal temperature is too cold or not cold you can increment or decrement the temperature:
• Press the (Set) (2 sec.) key in order to see on display the temperature set point.
• Press the key or the

( )
• Press the (Set ) key in order to store the new temperature set point.
1. Light switch
2. Automatic defrosting button
3. Button to show set temperature
4. Button to decrease temperature
5. Button to increase temperature
LED MODE
ON
Flashing
ON
Flashing
ON
Flashing
ON
ON
key in order to increment or decrement the temperature set point.

( )
1
2
3
1
2
3
Meaning
Active compressor
Delay against close starts
Defrosting in progress
Dripping in progress
Fans on
Fans start delay in progress
A temperature alarm activated
Continuous cycle in progress
LED MODE
ON
ON
ON
ON
°C
Flashing
ECO
ON
4
5
4
5
Meaning
Energy saving in progress
Light on
Auxiliary active
Unit of measurement
Programming
Energy saving in corso
-36-