ENGLISH
Digital Still Camera Mode
Protection from accidental Erasure
✤ The Protection function works only in <M.Player> mode. ➥page 19
✤ You can protect important images from accidental erasure.
If you format the Camcorder, all images including protected images
will be erased.
1. Set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [MEMORY].
I
The last recorded image appears.
I
If there are no recorded images on the Memory
Card, <No image!> is displayed.
3. Using the [œ œ œ œ /√ √ √ √ (REV/FWD)] buttons, search for
the photo image that you want to protect.
4. Press the [MENU] button.
I
The menu list will appear.
5. Move the [Zoom] lever to the up or down to select
<Memory>, then press the [OK] button.
6. Move the [Zoom] lever to the up or down to select
<Protect>, then press the [OK] button.
7. Move the [Zoom] lever to the up or down to
select <On>, then press the [OK] button.
8. To exit, press the [MENU] button.
I
The protection (
) icon is displayed.
[ Notes ]
I
You can directly access the Protection function
using the [QUICK MENU]. ➥page 20
I
If the write protection tab on the Memory Card is set
to LOCK, you cannot set image protection.
76
76
Modo de cámara fotográfica digital
Protección contra borrado accidental
✤ La función de protección sólo está operativa en el modo <M.Player>.
➥pág. 19
✤ Las imágenes más importantes se pueden proteger contra el borrado
accidental. Si formatea la videocámara, todas las imágenes,
incluidas las protegidas, se borrarán.
5
M.Player Mode
2/46
√Memory
Memory Type
√Memory Card
M.Play Select
√Photo
Delete
Delete All
Protect
√Off
Print Mark
†
ZOOM
Move
OK
Select
MENU
7
M.Player Mode
2/46
Back
Memory Type
M.Play Select
Delete
Delete All
Protect
Off
Print Mark
On
†
ZOOM
Move
OK
Select
MENU
8
2/46
800x600
100-0002
1. Coloque el interruptor [Power] en [PLAYER].
2. Coloque el interruptor [Mode] en [MEMORY].
I
Aparece la última de las imágenes grabadas.
I
Si no hay imágenes grabadas en la tarjeta de
memoria, aparece <No image!>.
3. Busque la imagen que desee proteger presionando
Exit
los botones [œ œ œ œ /√ √ √ √ (REV/FWD)].
4. Presione el botón [MENU].
I
Aparecerá la lista de menú.
5. Mueva la palanca [Zoom] arriba o abajo para
seleccionar <Memory> y presione el botón [OK].
6. Mueva la palanca [Zoom] arriba o abajo para
seleccionar <Protect> y presione el botón [OK].
Exit
7. Mueva la palanca [Zoom] arriba o abajo para
seleccionar <On> y presione el botón [OK].
8. Para salir, presione el botón [MENU].
I
Aparece el icono de protección (
[ Notas ]
I
Puede acceder directamente a la función Protection
utilizando el botón [QUICK MENU].➥pág. 20
I
Si la pestaña de protección contra escritura en la
tarjeta de memoria está colocada en LOCK,
no puede definir la protección de imagen.
ESPAÑOL
).