Safety Instructions; Installation - Vanucci EVO Instrucciones De Uso

4.2 | Safety instructions

WARNING!
Danger for children and persons with reduced physical, sensory or mental
abilities (e.g. partially disabled persons, elderly persons with reduced physical
and mental abilities) or lack of experience and knowledge of dealing with
motorcycles (e.g. older children)!
• Keep the packaging film away from children, as there is a risk of suffocation.
CAUTION!
Risk of crashes and accidents!
• Every time you use the tank bag, check it for damaged or missing parts
• Before every journey, check that the attachment is secure and cannot work
loose.
• When packing the tank bag, distribute the weight evenly – max. load 3 kg.
• Adapt your riding style to the new situation. You must not exceed a maximum
speed of 130 km/h. A test ride on easy terrain at a gentle speed is a good way
to accustom yourself to the altered road holding of your bike.
• At least every 200 km, check that it is still correctly positioned and secure.
• Make sure that no lights are covered.
Risk of injury!
• To avoid injury when installing the Vanucci EVO Tank Bag make sure that your
motorcycle cannot topple over and that you have adequate lighting.
NOTE!
Risk of damage
• Protect vehicle parts and their sensitive surfaces, which may come into contact
with tank bag, from scratches caused by friction or vibration etc.. You can do
so, for example, using transparent, self-adhesive protective film.
• Always keep the surfaces of the tank bag that face the motorcycle clean. Sand,
dust and other soiling can damage surfaces (especially paintwork) as they act
like sandpaper.
• When fastening, make sure that all the parts of the vehicle can move freely
without restriction and are fully functional.
• Cables must not chafe or become trapped.
• Make sure that the components of the tank bag do not come into contact with
moving and/or hot parts of the vehicle.
14

5 | Installation

1
1. Place the EVO Top Ring on the pre-installed model-specific EVO Tank Ring, which has to be
purchased separately.
2. Then place the Vanucci EVO Tank Bag on the EVO Top Ring. Position the Vanucci EVO Tank Bag to
suit your taste and riding habits. Make sure that the Vanucci EVO Tank Bag rests homogeneously
on the tank, and make sure that the handlebars and operating controls can move freely.
3
3. Remove the Vanucci EVO Tank Bag from the EVO Tank Ring with the EVO Top Ring. Make sure to
keep the EVO Top Ring in position underneath the Vanucci EVO Tank Bag.
4. Now mark the position of the EVO Top Ring. Place the drilling jig, which is included with delivery, in
accordance with the markings underneath the Vanucci EVO Tank Bag.
2
4
15