Operating; Operating Instructions - Midea MPM3-10CR-BB6 Manual De Instrucciones

OPERATING iNSTRUCTiONS
OPERATING iNSTRUCTiONS
2
COOLING OPERATION
- Press the "MODE" button several times until the "COOL" indicator light comes on.
- Press the UP and DOWN buttons "A" or "y" to select your desired room temperature.
The temperature can be set within a range of 17°C-30°C/62°F-88°F.
- Press the "FAN " or "TURBO "button to choose the fan speed.
DRY OPERATION (DEHUMIDIFY)
Press the "MODE" button until the "DRY" indicator light comes on.
Under this mode, you cannot select a fan speed or adjust the temperature. The fan motor
operates at LOW speed.
Keep windows and doors closed for the best dehumidifying effect.
The duct can be removed when in DRY mode.
FAN OPERATION
Press the "MODE" button until the "FAN " indicator light comes on.
Press the "FAN " button to choose the fan speed. The temperature can not be adjusted.
The duct can be removed when in FAN mode.
AUTO OPERATION
Press the "MODE" button until the "AUTO " indicator light comes on.
Under this mode, you can not select a fan speed. The fan motor operates at Auto fan
speed. The temperature can be set within a range of 17°C-30°C/62°F-88°F.
TIMER OPERATION
The AUTO-TIMER feature offers a unique option to pre-set the on and off times of the unit via a 0.5 hr to 24hr
timer.
Note: The Mode, Fan Speed and Temperature settings must be selected prior to using the Auto-Rmer function.
1) Timer-Off setting.
Please be aware that in order for the Timer=Off function to work properly, the unit must be powered on.
Example: If at 8:00 pm the Timer-Off is set at 2.0, then the unit will automatically power off and stop cooling
at 10:00 p.m. or after 2 hours have elapsed.
a) Push the Timer-Off button: - The display will indicate the number of hours until the unit shuts off.
b) Press or hold the Timer-Off button until the display window indicates the number of hours that is desired
for the unit to continue running,
c) After a 5 second delay, the display will switch back from the time increment to the desired temperature
setting