Midea MPM3-10CR-BB6 Manual De Instrucciones página 7

AiR CONDiTiONER FEATURES
_) TEMP SENSING Feature
0 o
RE. O
HI TEC)p
SENT
NOTE:
The remote control serves as a remote
thermostat allowing for the precise
temperature control at its location.
To activate the Temp Sensing feature, point the remote
control towards the unit and press the TEMP SENSING
button. The remote display is actual temperature at its
location.
The remote control will send signal to the air conditioner
every 3 minutes interval. If the unit does not receive the
Temp Sensing signal during any 7 minutes interval, the
TEMP SENSING indicator light turns off to indicate the
TempSensing mode has ended.
The actual temperature can be displayed at the
unit by pressing the Fan Only mode. When in the
Cool mode, the unit display indicates the set
temperature.
0 SWING button
9
0 0
_E. O
HI O
TeMe
SEN_INe
NOTE:
Use the SWING button to initiate the airflow
direction setting operation(This button is available
only when the unit is on ).
1. Press the SWING button, the swing feature is
activated.
2. Each press will change the swing angle for 6 °.
Keep pressing the button to move the horizontal
louver to the desired position.
If keep pressing the SWING button without
releasing for 2 more seconds, the horizontal
louver would swing up/down automatically.
3. Press the SWING button again to stop the
movement.