Before First Use; Cleaning And Maintenance - Tristar BL-4430 Manual De Usuario

BeFoRe FIRST uSe

• Wash before using the device for the first time the cap for refill hole
(no. 1), the jar lid (no. 2) and the transparant jug (no. 3) in a warm soapy
water. Rinse and dry thoroughly. These parts are not dishwasher proof.
• caution! Never immerse the base (no. 6) in water or other liquid. Run
the blender no longer than 5 minutes continuous, after that always
cool the mixer for 15 minutes.
uSe
• Before placing the transparent jar (no.3) on the base (no.6), make sure
the plug is not placed in the socket and the position of the speed
selector (no. 5) on the 0 mode is selected.
• Place the ingredients in the jar. The maximum capacity of the jar is 1,5
liters. To select slow mode 1, for faster mode 2, mode 0 for release. For a
short fast operation, select the Pulse mode, you should switch insisting
in this mode, use up to 1 minutes, about possible overheating of the
engine. Allow the unit to cool before further use.

cleaNINg aND maINTeNaNce

• Always remove the plug from the outlet before storage or cleaning the
device.
• Clean the outside of the device with a clean soft, damp cloth. Never
immerse the device in water or any other liquid.
• Clean the cap for refillhole (no. 1), the jar lid (no. 2) and the transparant
jug (no. 3) in a warm soapy water. Rinse and dry thoroughly. These
parts are not dishwasher proof.
• cauTIoN! The blades in the jar are very sharp, never try to replace
them and be careful with the cleaning. Avoid any contact with the
blades, they can seriously injure.
guaRaNTee
• The device supplied by our company is covered by 24 month
guarantee starting on the date of purchase (receipt).
• During the life of the guarantee any fault of the device or its accessories
to material or manufacturing defects will be eliminated free of charge
by repairing or, at our discretion, by replacing it. The guarantee services
do not entail an extension of the life of the guarantee nor do they give
rise to any right to a new guarantee!
• Proof of the guarantee is provided by the proof of purchase. Without
proof of purchase no free replacement or repair will be carried out.
• If you wish to make a claim under the guarantee please return the
entire machine in the original packaging to your dealer together with
the receipt.
• Damage to accessories does not mean automatic free replacement of
the whole machine. In such cases please contact our hotline. Broken
glass or breakage of plastic parts are always subject to a charge.
• Defects to consumables or parts subject to wearing , as well as
cleaning, maintenance or the replacement of said parts are not covered
by the guarantee and hence are to be paid!
• The guarantee lapses in case of unauthorized tampering.
• After the expiry of the guarantee repairs can be carried by the competent
dealer or repair service against the payment of the ensuing costs.
Blender
eN
5