Extension Cords - hilmor 1950532 Instrucciones De Operacion Y Mantenimiento

WARNING: RISK OF FALLING
WHAT CAN HAPPEN
This machine can fall from a table, workbench,
or roof causing damage to the machine and
could result in serious injury or death to
CAUTION: RISK FROM NOISE
WHAT CAN HAPPEN
Under some conditions and duration of use,
noise from this product may contribute to
SAVE THESE INSTRUCTIONS FOR FUTURE USE

EXTENSION CORDS

If an extension cord must be used, be sure it is:
• a 3-wire extension cord that has a 3-blade grounding plug, and a 3-slot receptacle that
will accept the plug on the product
• in good condition
• no longer than 50' (15.2 m)
• 16 gauge (AWG) or larger. (Wire size increases as gauge number decreases. 14 AWG
and 12 AWG may also be used. DO NOT USE 18 AWG.)
NOTICE: Risk of Property Damage. The use of an undersized extension cord will
cause voltage to drop resulting in power loss to the motor and overheating.
LOCATION
WARNING:
•
•
away from the wall or other obstructions that will interfere with the flow of air.
Keep the machine away from areas that have dirt and/or volatile fumes in the
TRANSPORTING:
CAUTION: When transporting the machine in a vehicle or trailer, etc, make sure it is
well secured to prevent tipping. Damage can occur to the machine or surrounding
CAUTION: Do not tip over the vacuum pump as it can leak oil. Always transport/
store/use in the upright and level position. Make sure oil drain plug, gas ballast
LIFTING
CAUTION: Unit is heavy use caution when lifting. Always lift by the handle or by
the recommended hoist points using the hilmor® carrying strap. The lifting of the
machine has not been tested with other accessories. Using untested accessories
can cause damage to the equipment or personal injury.
HOW TO PREVENT IT
Always operate this machine in a stable
secure position to prevent accidental
movement of the unit.
HOW TO PREVENT IT
Always wear certified safety equipment: ANSI
ENGLISH
7 7