Attention: The appliance, particularly the stainless steel kettle becomes
extremely hot during operation - danger of burn injuries! For example, use
potholders when handling the appliance to prevent burns. Beware of sharp
edges - risk of injury!
Do not open the door while the appliance is in operation – the escaping hot
air can cause burn injuries.
CLEANING AND CARE
1.
Do not immerse the housing, the stainless steel kettle, and the power cord
in water or other liquids!
2.
Do not use any abrasive scouring agents, steel wool, metal objects, hot
cleaning agents or disinfectants, as they can damage the appliance.
3.
Open the door of the appliance. Disconnect the power connection by pulling
the power plug out of the stainless steel kettle.
16.
the warming function. To do this, place the
switch for the warming function on „I".
17.
by repeating steps 10 to 20. Reheating the
appliance is not necessary, you can simply
add the ingredients directly and switch on the
appliance.
18.
corn, place all switches to „0" and unplug
the power plug from the electrical outlet.
19.
making popcorn, this can be due to an accu-
mulation of grease. Switch off the appliance
and clean it, as described in the chapter,
"Cleaning and care", before making any more
popcorn.
Switch off the appliance via the On/Off switch, by placing the
switch on "0". Switch on the warming function by placing the
switch on "0".
Unplug the power plug from the electrical outlet.
Allow the appliance to cool completely.
If need be, you can now switch on
Now you can prepare more popcorn
When you have finished making pop-
Note: If there is a lot of smoke when
21