SEVERIN KS9827 Instrucciones De Uso página 13

1. Remove the hinge cover (1).
2. Use a suitable pointed tool to remove the cover (5).
3. Use a suitable screw-driver to remove the two
screws (2) holding the upper hinge (3) to the
housing.
4. Carefully lift up the door and place it on a soft
surface to protect it from scratches.
5. Remove the blind covers for the hinge mounting
holes (9) and fit it in the corresponding place on
the right. Ensure that the cover is firmly pushed
down into the hole.
6. Pull out the two bolts (7) which hold the lower
right hinge plate (4) and the adjustable foot (6) in
position.
7. Remove the adjustable foot (8) on the left and
insert it into the corresponding thread on the right.
8. Install the lower hinge plate (4) with the two bolts (7) on the left.
9. Replace the door in its new position. Ensure that the hinge pin is inserted into the guide bushing
(hole) on the lower part.
10. Install the upper hinge (3) on the left-hand side. Ensure that the hinge pin is inserted into the
guide bushing (hole) on the upper part.
11. Replace the cover (5) in the corresponding holes on the right.
12. Replace the hinge cover (1) on the upper hinge.
13. Put the unit back in its intended position and wait for about two hours before connecting it to
the mains.
Temperature control
The unit is activated by connecting it to the mains. It is only switched off completely when the plug is
removed from the wall socket.
The temperature in the refrigerator cabinet can be adjusted by setting the temperature control.
Temperature settings from 1 – 5 are available.
1 The cooling function is switched off; however, the appliance is still connected to the mains. To
switch off the unit completely, the plug must be removed from the wall socket.
3 For normal food storage, the temperature control should be set to this intermediate position.
5 Maximum cooling effect.
We recommend setting the control initially to position 3. After a certain time, the actual temperature
should then be checked with a thermometer, and adjustments made if necessary.
Following a power interruption, or if the unit has been switched off on purpose, it may take 3 to 5
minutes before it switches on again.
Storing food
– The temperatures inside the refrigerator cabinet and cold storage compartment depend mainly
on the ambient temperature, the temperature control setting and the amount of food stored.
Cold storage compartment:
– The cold storage compartment is specifically designed for short-term storage of fresh meat, fish
and poultry.
13