Manually Setting The Airplay™ Channel; Specifications; Power Requirements - Airplay AIR-1-010011-H1 Manual Del Usuario

In a Multi-User gaming situation (i.e. two or more AIRPLAY™s being used from the
same PlayStation® configuration) each AIRPLAY™ pair must be set to a different
channel.
Perform the following procedure after you have connected the AIRPLAY™s to the
PlayStation® configuration:
1. Check the channel (i.e. the last two symbols on the Mating Number) on the back of
each of the AIRPLAY™ Controllers being used. If the channels are different, no
adjustments will be necessary and you can proceed with the startup and playing of
your game.
2. If the default channel for two or more controllers happens to be the same, you will
have to manually set the channel on all but one of those controllers (refer to the
section below on "Manually Setting the AIRPLAY™ Channel").
Manually Setting the AIRPLAY™ Channel Manually Setting the AIRPLAY™ Channel Manually Setting the AIRPLAY™ Channel
Manually Setting the AIRPLAY™ Channel Manually Setting the AIRPLAY™ Channel
When the POWER/CHANNEL key is pressed to change channels, the channels are
changed in sequence, starting from the default channel and proceeding through the
sequence of 16 available channels as follows:
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 1 - 2 ...
In some cases, it may be desirable to change directly to a specific channel. The user may
do this with a simple key sequence. For example, to change AIRPLAY™ to channel 8,
the user would do the following:
1. Press (and hold down) the POWER/CHANNEL key.
2. Click the 5 key.
3. Click the s key.
4. Release the POWER/CHANNEL key.
To set your AIRPLAY™ controller back to its default channel, Press (hold down) the
POWER/CHANNEL button, Click the START button, then Release the POWER/
CHANNEL button.
(NOTE: Whenever the controller is Powered-down and then up again, it will
return back to its default channel.)
8
Combi-1.p65 8

Specifications

Power Requirements:

• Input - One AA Standard Carbon, Alkaline, NiCad, NiMH, Pure Energy
Rechargeable Alkaline or Lithium Battery
• Normal operating voltage 1.25 - 1.6 volts
Power Consumption: (typical, continuous use estimates)
• 20 hours for most Alkaline batteries
• 8 hours for most NiCad rechargeable batteries
(Note: battery performance may vary depending upon operating
temperature, condition, type and brand of battery used.)
Operating Temperature: 59°F - 95°F (15°C - 35°C)
Radio Frequency Output: 315 - 319.5 MHz
Operating Range: Maximum Range 25 feet (7 meters)
Compatibility:
• Designed for use with PlayStation® game console and the
MULTITAP™ adapter.
• Compatible for use with all licensed PlayStation® peripherals
and all software designed for use with the standard
PlayStation® digital controller.
• May also be used in combination with licensed digital
controllers, analog controllers, specialty controllers, and
Sony® memory cards.
Regulatory Compliance:
FCC Part 15 and
Industry Canada RSS-210
Programming Features:
• Auto-Repeat - 10 Hz repeat rate for any/all 4 triggers and 4
standard control keys.
• Macro programmability of a maximum of 20 Keystrokes (or 5
seconds) for each of any of the 4 triggers or 4 control keys.
w w w . a i r p l a y e r . n e t
11/1/99, 1:15 PM