Solar-Log 300 Manual Del Usuario página 280

Datos técnicos
Interface
RS485/RS422 – interface usage
RS485 – interface usage
CAN-bus
2x S -In / 1x S -Out
0 0
Relay
Alarm
USB connection
PM+
Solar-Log Meter (optional)
TM
Network
GPRS (optional)
* not with GPRS models
280
Solar-Log 250 Solar-Log 300
RS485/RS422 –
combined interface usage
Inverter connection (Fronius / Sunville can be connected on an RS422 in-
terface without an additional interface converter)
Connection of a Sensor Basic to re-
cord environmental data
(irradiance and module temperature sensor)
- Connection of the display panels produced by Schneider Displaytechnik, Rico or HvG
- Smart Relay Box connection for the management of consumption data
- -
- -
S pulse input – for optional recording and calculation of self-produced power consumption
0
-
- S pulse output to connect large external displays, pulse factor can be set to any value
0
- -
- -
-
- For connection of a Ripple Control Receiver to regulate the plant
-
-
Connection to the internet (Ethernet, fixed IP address or DHCP)
- Antenna connection and SIM card slot for Solar-Log™ with integrated GPRS
Solar-Log 1200 Solar-Log 1900
RS485 A – interface,
RS485 – interface,
RS485/RS422 B,
RS485/RS422 –
RS485/RS422 C* -
combined inter-
combined inter-
face usage
face usage
Connection of a Sensor Box Professional Plus to
record environmental data (irradiance, modu-
le and ambient temperature, wind sensor)
Sensor Box Professional
Meter connection, numerous options
Connecting the
Utility Meter and I/O
-
Box for PM remote
control technology
For the connection
of Voltwerk inverters
-
and other inverters
with a CAN interface
Second input to connect an additional power meter
For external switch control, e.g. heat pumps
Connection for
anti-theft protection
- via contact loop for
external alarms via
potential-free contact
To access data / Import firmware updates at plants
Fulfills the EEG 2012 requirements (Germany)
Current measurements via transformers (extra accessory)
up to 2 x 3 phases or 6 single phases
Solar-Log 2000
RS485 A – interface,
RS485/RS422 B,
RS485/RS422 C* -
combined inter-
face usage
Connecting the
Utility Meter and I/O
Box for PM remote
control technology
For the connection
of Voltwerk inverters
and other inverters
with a CAN interface
Connection for
anti-theft protection
via contact loop for
external alarms via
potential-free contact