Publicidad
Idiomas disponibles
Idiomas disponibles
Damage and/or malfunctions of the heater due to the use of other than high quality
water-free pure paraffin oil is not covered by the warranty.
Always refer to your local Zibro dealer for the right fuel for your heater.
ManUal
A
INSTALLING THE HEATER
1
Carefully remove your Zibro from the box and check the contents.
In addition to the heater you also need to have:
e a manual fuel pump
e a transportation cap
e these directions for use
Keep the box and the packaging materials (Fig. A) for storage and/or transportation.
2
Open the lid of the removable tank D and remove the piece of cardboard.
3
Fill the removable tank as indicated in Section B.
4 The floor should be firm and completely level. Reposition the heater, when it
is not level. Do not try to correct the situation by placing books or other
goods under the heater.
5
Insert the plug K into the wall-socket (230 Volts - AC / 50 Hz) and set the
correct time using the adjustment keys O (refer to Section C).
6
Your Zibro is now ready for use.
B
FILLING FUEL
B
Fill the removable tank in a suitable place since there can always be some spillage.
Follow the procedure below:
1
Make sure that the heater is switched off.
2
Open the upper lid and lift the removable tank out of the heater (Fig. B).
A
e
e e e e e
4
55
Publicidad
